Creativ Company Rivets| Calendars, Notebooks And Colouring Books|Small Decorations

Flat, two-part rivets for decorating and securing various items with a maximum height of 2 mm, such as faux leather paper, thin leather and textiles. Fastened together using a riveting tool – item no. 406170.

Depending on the material to be decorated with or joined with the rivets, a 1.5-2 mm hole must first be punched with punch pliers where the rivets are to be inserted (except with knitted textiles). If several layers are to be joined together, it is important that the combined layers have a maximum height of 2 mm (equivalent of four layers of faux leather paper, for example). The riveting tool used to join the two rivet parts consists of a rivet setter and a metal rod. Place the rivet setter (with the curved side facing upwards) on a firm surface. Place the flat rivet part with the flat side facing the curved rivet setter. Punch the rivet part with a stud through the punched holes/layers and then place the rivet stud in the hole of the flat rivet. Use a hammer and the rod to secure the rivet. Make sure that the curved side of the rod is facing down towards the rivet for the best result. It is also possible to assemble the rivets in the opposite direction, i.e. by placing the rivet part with stud in the rivet setter of the tool and the flat rivet at the top. Note: If the rivets do not join together, the surface underneath is probably not completely stable. In this case, try placing the rivet setter on a tabletop right above the table leg..

Rivets can be used to both create a unique effect and to secure several layers together. Perfect for faux leather paper, thick watercolour paper, leather, textiles, etc.

 

 

 

Specifications

Brand	Creativ Company
Diameter	7 mm
Sales Quantity	50 pc/ 1 pack
Colour	silver